MS Series Melt Blown Filter Cartridge
MS series melt blown filter cartridge is manufactured by the melt blown process of the pure polypropylene resin. The filtration structure is formed by thermal..
The MS series melt blown filter cartridge is manufactured through the melt blown process using pure polypropylene resin. The filtration structure is formed by thermal bonding without using any binders or adhesives. It has a graded pore structure of depth filtration with fine fibers on the inside and coarse fibers on the outside, allowing it to effectively remove contaminants such as suspended substances, particulates, and rust, providing efficient filtration and a long service life.
MS Series Melt Blown Filter Cartridge Features
- Free of surfactants, lubricants, anti-static agents, binders and adhesives.
- 100% Pure Polypropylene will not cause any pollution to the fluids.
- Wide chemical compatibility.
- Consistent performance, No unloading of contaminants even at high differential pressures.
- High void volume for high dirt holding capacity.
- Can be used in a wide range of applications.
- All kinds of adaptors are available.
Dimensions
| Outside Diameter | 2 1 ⁄ 2 " (6.4 cm) |
| Inside Diameter | 1" (2.5 cm) |
| Lengths | 9 3 ⁄ 4 " to 50"(24.8 cm to 127 cm) |
CONTACT TO BUY at 090.123.9008 (call/viber/zalo 24/7)
Other Pleated Filter Cartridge are available at VCR.
